Clean Cut Logo and Beuaty Shot
Scissor Cut for Easy, Fray Resistant Installation

By adjusting the physical characteristics of the polyethylene terepthalate filaments, the engineers at Techflex have produced a product with the same specifications as our PET sleeving with the unique advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives.

Flexo Clean Cut is ideal for field installers and other situations where access to a hot knife is impossible. Clean Cut's fray resistant properties allows frequent expansion of the cut end without unraveling. When cut with a hot knife, Clean Cut produces a clean, smooth and virtually frayless end.

Clean Cut is braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors.

Cut clean cut with scissors
clean cut is fray resistant
clean cut is available in various sizes
Colors
Flexo Clean Cut is available in Black and Gray.
Black Flexo Clean Cut CCP
Black (BK)
Gray Flexo Clean Cut CCP
Gray (GY)
Sizes
Nominal
Size
Product
Part #
Expans. Range Standard Spool
Put-Ups
Colors Lbs/
100'
Min. Max. Bulk Shop
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
2"
CCP0.13
CCP0.25
CCP0.38
CCP0.50
CCP0.75
CCP1.00
CCP1.25
CCP1.50
CCP1.75
CCP2.00
1/8"
5/32"
3/16"
1/4"
5/8"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
1/4"
7/16"
5/8"
3/4"
1"
1 3/16"
1 1/2"
2"
2 1/8"
2 1/2"
1,000'
1,000'
500'
500'
250'
250'
250'
250'
200'
200'
100'
100'
100'
100'
75'
50'
50'
50'
50'
50'
2
2
2
2
2
2
2
2
2
2
0.40
0.46
0.74
0.82
1.11
1.24
1.56
1.85
2.30
2.80
Specifications
Techflex makes every effort to ensure accuracy and completeness when describing the technical properties of our products. Customers are encouraged to test and evaluate the products for their own unique requirements.
Physical Properties
Monofilament Thickness (ASTM D-204) .008
Flammability Rating UL-94
Recommended Cutting Hot Knife/Scissor
Colors 2
Wall Thickness .024
Tensile Strength - Yarn (ASTM D-2265) lbs. 6
Abrasion Resistance Medium
Specific Gravity 1.38
Moisture Absorption % (ASTM D-570) .1 - .2
Hard Vacuum Data (ASTM E-595 at 10-5 torr)
TML .19
CVCM .00
WVR .16
Smoke D-Max (ASTM E-662) 56
Outgassing Medium
Oxygen Index (ASTM D-2863) 21
Chemical Resistance

1=No Effect   2=Little Effect   3=Affected   4=More Affected   5=Severely Affected
Aromatic Solvents 2
Alipahtic Solvents 1
Chlorinated Solvents 3
Weak Bases 1
Strong Bases 2
Salt Water (O-S-1926) 1
Hydraulic Fluid (MIL-H-5606) 1
Lubricating Oil (MIL-A-8243) 1
De-Icing Fluid (MIL-A-8243) 1
Strong Acids 3
Strong Oxidants 2
Esters/Ketones 1
UV Light 1
Petroleum 1
Fungus (ASTM G-21) 1
Salts 1
Operating Temperatures
Minimum Continuous -94°F/-70°C
Maximum Continuous (MIL-I-23053) 257°F/125°C
Melt (ASTM D-2117) 482°F/250°C
Other Information
Halogen Free Yes
RoHS Yes
SVHC None
UL/CSA Yes
RoHS UL CSA Recycle abyc
Downloads
Product Movie
Clean Cut & Clean Cut FR Youtube Movie
Click the thumbnail to launch the movie.

104 Demarest Road Sparta, NJ 07871
9:00am - 5:30pm EST
973-300-9242
973-300-9409

Copyright © 2016 Techflex, Inc. All Rights Reserved. | Terms of Use | Sitemap | Contact Us |
Translate This Page