Built on the same design as out Flexo F6 and F6 Woven, Flexo F6 Flat is a self-wrappable sleeve used to bundle and protect wire harnesses and cable assemblies in areas where space constraints restrict the use of traditional sleeving.
Lightweight and durable, it maintains its flexibility for conforming to irregular shapes and bends during installation.
Woven from monofilament and multifilament polyester yarn, Flexo F6 Flat provides noise suppression and a high level of mechanical abrasion protection making it the perfect for use in automotive applications.
The low-profile design is great for channeling and protecting wires that run under the carpet or in the headliner of automobiles.
||Standard Spool Put-Ups||Available
|Bulk Spool||Shop Spool|
|1"1 1/2" 1 3/4"2 1/4"||F6Z1.00BKF6Z1.50BK F6Z1.75BKF6Z2.25BK||30mm40mm 50mm60mm||
|Monofilament Thickness (ASTM D-204)||.015|
|Recommended Cutting||Hot Knife|
|Tensile Strength - Yarn (ASTM D-2265) lbs.||6-10|
|Moisture Absorption % (ASTM D-570)||.1-.2|
|Hard Vacuum Data (ASTM E-595 at 10-5 torr)|
|Smoke D-Max (ASTM E-662)||56|
|Oxygen Index (ASTM D-2863)||21|
1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected
|Salt Water (O-S-1926)||1|
|Hydraulic Fluid (MIL-H-5606)||1|
|Lubricating Oil (MIL-A-8243)||1|
|De-Icing Fluid (MIL-A-8243)||1|
|Fungus (ASTM G-21)||1|
|Maximum Continuous (MIL-I-23053)||257°F/125°C|
|Melt (ASTM D-2117)||482°F/250°C|
104 Demarest Road Sparta, NJ 07871
9:00am - 5:30pm EST