Grip Wrap is a lightweight, abrasion resistant sleeving with a unique hook sealing system that eliminates spot taping and doesn't require an open end for installation. The sleeving allows easy access for inspection, rework or replacement of components.
Grip Wrap offers cut-through and abrasion protection, and is easily installed on existing applications restricted by breakouts and large end fittings. It can be used to bundle wire harnesses, and can also be used as an economical alternative to molded channels.
The unique Grip Wrap system provides a variety of sealing and mounting options to accommodate any harnessing or cable management application.
Grip Wrap is available in Black.
|Flat Width||Standard Spool
|Extra Flexible Construction|
|Monofilament Thickness (ASTM D-204)|
|Recommended Cutting||Hot Knife|
|Tensile Strength - Yarn (ASTM D-2265) lbs.||7.5|
|Moisture Absorption % (ASTM D-570)||.1 - .2|
|Hard Vacuum Data
(ASTM E-595 at 10-5 torr)
|Smoke D-Max (ASTM E-662)||56|
|Oxygen Index (ASTM D-2863)||21|
1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected
|Salt Water (O-S-1926)||1|
|Hydraulic Fluid (MIL-H-5606)||1|
|Lubricating Oil (MIL-A-8243)||1|
|De-Icing Fluid (MIL-A-8243)||1|
|Fungus (ASTM G-21)||1|
|Maximum Continuous (MIL-I-23053)||257°F/125°C|
|Melt (ASTM D-2117)||482°F/250°C|
104 Demarest Road Sparta, NJ 07871
9:00am - 5:30pm EST